MakerBot Method Performance 3D Printer

    SKU: 900-0001A

    Carousel-1-Method Logo

    The First Performance 3D Printer

    Bridging the gap between industrial and desktop 3D printing.

    BUILT TOUGH

    Ultra-Rigid Metal Frame Construction:

    A structurally-optimized metal frame runs the full length of the body to offset flexing. Less flexing means more consistent prints with better part accuracy and fewer failures.

    Circulating Heated Chamber


    UNCOMPROMISED LAYER ADHESION AND PART STRENGTH:

    Control the temperature and quality of every layer - not just the first. While heated build plates are effective at reducing warping, Method takes this further with full active heat immersion during the entire duration of the print.

    Dual Performance Extruders

    SPEED AND DIMENSIONAL ACCURACY:

    The Dual Performance Extruder system is built from the ground up to accelerate print times and provide dimensional accuracy across every part.

    Smart sensors for material management and print protection:
    Leveraging Industrial DNA, each Performance Extruder contains a suite of sensors that detect when material is running low and allows for active jam detection during the print duration, It's like autonomous protection for your print-and your printer.

    Greater torque with a 19:1 dual-drive gear ratio:
    From great strength comes great performance. The 19:1 dual-drive gear ratio keeps material loaded and ready for reliable material extrusion at every layer.

    Lengthened thermal core with less than 60-second heat up time:
    A lengthened thermal core and a fast start up time ensure that materials are ready to go when your ideas are.

    OPTIMIZED MATERIAL STORAGE

    Dry-Sealed Material Bays

    Dry-Sealed Material Bays form a near-perfect seal to keep material free of damaging humidity. A suite of built-in sensors provides that your material is stored in its optimal environment—a feature previously only available in industrial 3D printers.

    Printing
    PRINT TECHNOLOGY; Fused Deposition Modeling (FDM)
    PRINT HEADS: 2
    DIMENSIONAL ACCURACY: ± 0.2 mm
    LAYER RESOLUTION
    Range: 20 - 400 microns
    PRINT MODES TUNED AND OPTIMIZED FOR:
    100 microns - High Quality Print Mode
    200 microns - Balanced Print Mode
    BUILD SPEED
    Up to 2x faster than desktop 3D printers
    Max Material Flow Rate: ~50 mm3 per sec
    Print Head Travel Speed: Up to 500 mm per sec
    MAXIMUM BUILD VOLUME
    19 L x 19 W x 19.6 H cm / 7.5 x 7.5 x 7.75 in single extrusion
    15.2 L x 19 W x 19.6 H cm / 6.0 x 7.5 x 7.75 in dual extrusion
    Product Testing
    TEST HOURS
    220K+ total testing hours across 110 printers (Equivalent to 25 years)
    (system reliability, subsystem, and print quality)
    Printer Hardware
    PRODUCT DIMENSIONS:
    43.7 L x 41.3 W x 64.9 H cm /
    17.2 x 16.3 x 25.6 in

    PRODUCT WEIGHT:
    29.5 kg / 65 lbs

    SHIPPING BOX DIMENSIONS:
    76.5 H x 50.0 W x 55.5 D cm /
    30.1 x 19.7 x 21.9 in

    SHIPPING BOX WEIGHT:
    37.1 kg / 81.7 lbs

    FRAME CONSTRUCTION:
    Aluminum Die Cast Base
    Extruded Aluminum Uprights
    Steel Weldment Gantry Frame

    TEMPERATURE CONTROL
    Circulating Heated Chamber
    BUILD PLATE
    Flexible Steel Build Plate
    BUILD SURFACE
    Reusable Grip Surface
    DISPLAY
    5" Full-Color Capacitive Touch Screen
    CAMERA RESOLUTION
    640 x 480 pixels
    Sensor Suite
    21 sensors including:

    DRAWER:
    Temperature
    Humidity Control
    Material Detection
    RFID

    PERFORMANCE EXTRUDERS:
    Temperature
    Material Detection
    Encoder (Jam Detection)

    PRINTER:
    Lid – Open/Closed
    Door – Open/Closed
    Temperature Sensors – Heated Chamber
    Calibration Sensors
    Extruder Hardware
    EXTRUDER THERMAL CORE LENGTH: 48.2 mm

    MAX EXTRUDER DRIVE TORQUE: 200 Newtons

    NOZZLE DIAMETER: 0.4 mm
    Materials
    SPOOL TYPE: Smart Spools with RFID sensors

    SPOOL SENSORS: Remaining Material, Material Color, Material Kind
    SUPPORTED MATERIALS
    MakerBot Precision Materials: PLA, Tough, PVA
    MakerBot Specialty Materials: PETG, more to come
    COLOR AVAILABILITY
    MAKERBOT PRECISION TOUGH: Slate Gray, Onyx Black, Stone White, Safety Orange

    MAKERBOT PRECISION PLA: Cool Gray, True Black, Natural, True White, True Orange, True Red

    MAKERBOT SPECIALTY PETG: Translucent
    Operation
    AMBIENT OPERATING TEMPERATURE: 15 - 26º C / 59 - 78º F, 10 - 90% RH non-condensing

    STORAGE TEMPERATURE: 0 - 38º C / 32 - 100º F

    PRINTER AUTOMATION: Automatic Z Calibration, Automatic Nozzle Calibration, Automatic Material Loading
    Safety & Compliance
    FCC
    EMC
    Low Voltage Directive 60950-1, 62368
    Software
    SOFTWARE BUNDLE: MakerBot Print, MakerBot Mobile

    SUPPORTED FILE TYPES:
    MakerBot (.makerbot), STL (.stl), SolidWorks (.sldprt, .sldasm), InventorOBJ (.ipt, .iam), IGES (.iges, .igs), STEP AP203/214 (.step, .stp), CATIA (.CATPart, .CATProduct), Wavefront Object (.obj), Unigraphics/NX (.prt), Solid Edge (.par, .asm), ProE/Creo (.prt, .asm), VRML (.wrl), Parasolid (.x_t, .x_b)

    OPERATING SYSTEMS: Windows (7, 10) Mac OS X (10.9+)
    Electrical
    CONNECTIVITY: USB Drive, USB, Ethernet, Wi­Fi

    POWER REQUIREMENTS: 100 - 240 V, 4A, 50 - 60 Hz, 400 W max.
    Warranty
    Free 1-Year Extended Warranty

    SUPPORT PLANS: MakerCare Gold (2 Years), MakerCare Platinum (3 Years)

    This is what is included in the box for: MakerBot Method Performance 3D Printer

    • MakerBot Method 3D Printer
    • Spring Steel Build Plate
    • 1 Spool of Tough Precision Model Material
    • 1 Spool of PVA Precision Support Material
    • 1 Performance Extruder 1 Model
    • 1 Performance Extruder 2 Support
    • 1 Nozzle Brush
    • 1 Hex Key
    • 1 USB A-to-B Cable
    • 1 UK Power Cord
    £6,000.00

    Fixed Rate Payments With Tax Relief

    Lease Term 5 Years
    Weekly Payment £31.15
    First Payment £405.00
    57 Monthly Payments £135.00
    Total Cost £8,100.00
    Tax Relief @ 19% -£1,539.00
    Nett Cost Of Finance £6,561.00

    Call Us To Get Started - 0121 747 2499

    Related Products

    MakerBot Replicator 5th Generation Desktop 3D Printer

      The MakerBot Replicator Desktop 3D Printer provides unmatched speed, reliability, quality and connectivity for all your 3D printing needs. 5th Generation Easy-to-use, reliable desktop 3D printing using Fifth generation technology defines the new standard for ease of use, quality, and reliabilit...
    VENDOR CODE
    MP05825
    PRICE
    £2,199.00
    Discontinued
    Finance Available From Just £49.48 Per Month

    MakerBot Replicator Mini

    Unleash creativity with an educational, entertaining and useful 3D printer. EASY & AFFORDABLE 3D PRINTING Transform a small desk in your home or classroom into an exciting creativity center. Print, manage, and share your 3D creations simply and seamlessly, with free MakerBot software for your PC ...
    VENDOR CODE
    MP05925
    PRICE
    £999.00
    Discontinued

    HP Designjet 3D Printer Post Warranty 1year Next Day Onsite DMR

    HP Care Pack Services offer upgraded service levels to enhance your warranty cover for your total peace of mind and help you to stay up and running.
    VENDOR CODE
    UT851PE
    PRICE
    £1,416.00

    Stratasys Mojo 3D Printer Print Pack

    The Mojo 3D Printer brings affordable professonal 3D printing to your design process. Powered by proven Stratasys FDM (Fused Deposition Modelling) technology it's the 3D printing technology you can trust to empower your design creativity. Packaged to perfection the Mojo 3D Print Pack gives you every...
    VENDOR CODE
    690-10100
    PRICE
    £5,165.00
    Out of Stock
    Finance Available From Just £116.21 Per Month

    Solvoprint Performance Airglide 80 - 54in

    An 80 micron PVC polymeric film with a permanent dark grey adhesive and white glossy appearance. Fine air channels along its surface allow easy mounting on larger projects and is ideal for vehicle wrapping applications.
    VENDOR CODE
    6026438
    PRICE
    £321.66
    14 in stock

    Solvoprint Performance 80 - 42in

    A premium 80 micron glossy white polymeric PVC film with permanent adhesive and residue free removal is ideal for both indoor and outdoor applications (particularly vehicle wrapping) and has outdoor stability of up to 5 years outdoors. It is M1 fire certified and will work with all solvent and lat...
    VENDOR CODE
    6032685
    PRICE
    £161.85